17 December 2013

Sowing days with our new seed drill

We would like to begin this post with the words which summarize the feelings of all farmers in our area (and largely of Spain) this year; these feelings are concern, sadness, apathy and ruin. This year is being absolutely dry (it has not rained since May in our area), and the soil is not ready to sow. In some fields, barley has sprouted (what was sowed on the first days of November,) but it is drying and some farmers are going to have to sow them again... we hope God helps us!.

Regarding our seed drill, whose previous owner was our friend Alberto (he sold it to us because he wants to practice minimun tillage) so it is second hand (he bough a Horsch... we spoke about that in this post). The machinery was manufactured in 2007 and it is in perfect conditions. We have a small problem with the computer but thanks to Jordi Llorens (who is an employee of Solá Group), we are fixing it. The seed drill is a Solá Neumasem 799.

The features more outstanding are:
  • Mounted pneumatic seed drill. 
  • Working width of 5m (40 rows and row spacing of 12.5cm). It is equipped with coulters. 
  • Transport width of 3.05m. 
  • Soil tillage implements of 16 tines. 
  • Hopper of 1,200 liters. 
  • Accord distribution system. 
  • Selector sieve. 
  • Harrow. 
  • Calibration kit for the dosing test. 
  • Triple leveler. 
  • Seed drill control unit for filling using a worm screw.
  • Control system: hectare counter, fan rev. counter, distributor alarm and seed level sensor. 
  • Hydraulic track markers. 
  • Mechanical fan with P.T.O. shaft 1,000 r.p.m. 
  • Net weight: 1,730kg. 
  • Tyre: 350/50-16. 
  • Rear lights to work and transport.

Our tractor works very fine with it (although it has only enough power to work on hills). As the P.T.O. speed of our Agrotron can be configured at 1,000E, the engine works at 1,600 r.p.m. and working speed is of 7km/h (using 3L gear) so the consumption is optimum. We had to put 4 front counterweights more in order to avoid problems when the hopper of our seed drill is full (total weight is about 3,000kg).

As you can see in some of our pictures, we are using a flat roller after sowing to compact the soil... we hope with this way grain can have a better sprout (we are sowing more grain that other campaigns, 240kg/ha, because we think a lot of grains will be losted before and after sprouting because of the weather).


Videos:
Pictures:
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill
Solá Neumasem 799 seed drill

6 comments:

  1. Muy buena entrada, la sembradora Solá Neumasem tiene muy buena pinta. Me extraña que el Deutz vuestro no le "sobre" potencia para arrastrarla.
    Me sorprende también lo seca que está la tierra y la "pena" que representa sembrar en esas condiciones, pero mañana 19 de diciembre lloverá y ya veréis como se empieza a "arreglar" el año. Lo que entristece es ver como algunos agricultores tendrán que volver a sembrar con el coste de la semilla.

    Una pregunta, ¿los faros de trabajo que lleva la sembradora los llevaba originalmente o los puso el anterior propietario o vosotros?
    También me sorprende la cantidad de sobrepeso con los contrapesos adiccionales que habéis colocado en el eje frontal. ¿Lleváis agua en las ruedas delanteras?
    Bueno felicidades por el post, y ánimo que mañana se inicia el comienzo de un buen año agrícola.

    ReplyDelete
    Replies
    1. Helio, muchas gracias por tu comentario.
      Las faros de trabajo vienen de serie en la máquina y la verdad es que se agradecen ahora que los días son muy cortos.

      Respecto a los contrapesos, llevamos el máximo que podemos ponerle y también le hemos puesto agua en las cuatro ruedas. Aún así, cuando va cargada hay que tener cuidado porque realmente le hace mucha palanca.

      Saludos.

      Delete
  2. bueno, ya ha llovido bien ?no

    ReplyDelete
    Replies
    1. Hola.
      Muchas gracias por tu mensaje.
      La verdad es que si. Ha llovido unos 50mm en dos semanas, por lo que está perfecto.
      Estamos terminando de sembrar, y ahora si que se trabaja bien.

      Saludos.

      Delete
  3. Hola, interesante blog. Muchas felicidades. Cuantas hectáreas manejáis?

    ReplyDelete
    Replies
    1. Hola Anselmo. Muchas gracias por tu comentario.

      La verdad es que nuestra explotación es muy reducida... trabajamos entorno a 120ha.

      Delete