05 August 2014

​Harvesting estero wheat with the Fendt 6300C Combine

In the farm where we sowed our garlic this year and after harvesting them, our friends Sergio and Alfonso were harvesting with their Fendt 6300 C combine. This farm has about 2,000ha however they told us they don't have any problem to harvest... working with this Fendt combine is a pleasure for them. When we recorded the video, they were harvesting estero wheat. We were lucky because we could visit them when they sowed this wheat (at the same time we were sowing garlic too) as you can see in our video and post about that. This wheat is sold for seed, so it will be distributed among several farmers. About yield, it is about 9,000kg/ha (we were impressed because they could fill the hopper really very quickly and continually) because it is watered during the whole year.

Regarding Fendt 6300C combine (perhaps we should say Laverda M310 combine because it is the same harvester and even they are manufactured in the same factory located in Breganze - Italy... we think Fendt only has contributed with its colors :), as Sergio and Alfonso commented, the combine works really fine. The Agritronic Plus II console shows easly all information of the combine to their users (for example, the driver can know rapidly if the combine is wasting grain), its cab is very comfortable and the noise level is minimum,  the prepare and feeding roller, based on a roller fitted with retracting fingers at the entrance of the elevator channel, is another solution to ensure the continuous and even flow of crop from the cutting header to the threshing machinery, the Agco Power engine (stage III/B emission level) is designed for low fuel consumption (they only have to fill the diesel tank every two working days), etc... they are very pleased with this Fendt harvester!!

Versión en español.

Video:

Pictures:
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat
Fendt 6300 C Combine. Estero wheat




2 comments:

  1. Una pregunta, han sacado una tubería o manguera del escape?
    Al final del vídeo, en la toma desde la caja del camión, se aprecia una tubería que sale del escape y va hacia el lateral derecho. ¿No sabrás para qué es?
    Un saludo.

    ReplyDelete
    Replies
    1. Hola Agrosdemeter. Gracias por tus preguntas.

      Así es, esa tubería va desde el escape a la entrada de aire del motor. Es un sistema muy antiguo (por ejemplo nuestro Agrotron también lo tiene), que sirve para autolimpiar el filtro de la adminión de aire del motor.

      Saludos.

      Delete